Daily maintenance of kitchen appliances

Sort：Company news
auther：
Source：
Time：2020-10-10 15:59
num：

SummaryUse soapy water to check whether there is leakage at the joint of the air supply pipe and whether the rubber hose is aged and cracked.

Daily maintenance of kitchen appliances





Daily maintenance of kitchen appliances

SummaryUse soapy water to check whether there is leakage at the joint of the air supply pipe and whether the rubber hose is aged and cracked.

Sort：Company news
auther：
Source：
Time：2020-10-10 15:59
num：

Detail

Maintenance method

1. Use soapy water to check whether there is leakage at the joint of the air supply pipe and whether the rubber hose is aged and cracked.

2. Regularly clean the fire hole on the fire cover to prevent blockage.

3. After the stove cover is damaged, it is necessary to purchase the original product and not to replace it at will, so as to avoid bad combustion state.

4. The intake hose will be aged or damaged after long-term use, which will form a potential safety hazard. Therefore, the intake hose should be replaced in time if there is aging phenomenon. It is not allowed to continue to use after patching with adhesive tape.

Gas stove

1. In the process of using gas stove, the indoor air must be kept in circulation;

2. In the process of using the gas stove, please do not touch the surface of the stove with your hands to prevent scalding;

3. When the uneven flame of gas stove burner is found, it can be removed by brush or steel needle;

Maintenance of gas stove

4. The bottom of the pot should be kept dry to prevent the gas stove from being rusted and blocked by water dripping into the gas stove;

5. It is not allowed to wipe the gas stove air hole with oil stain rag to prevent the air hole from being blocked;

6. It is better to check the rubber tube of the old stove regularly, and it is recommended to replace it once a year;

7. Check the stove for air leakage, and oil the switch button every six months.

Range hood

1. The installation height of range hood must be appropriate, so that it can not only ensure that there is no contact, but also ensure the effect of lampblack; the normal installation height is the distance between the bottom of the range hood and the top of the stove is 650 ~ 700mm.

2. The outlet pipe should be shortened as far as possible, and the turning radius should be as large as possible, so as to make the air flow smoothly, smoke well and reduce the noise.

3. When installing in the common flue with check valve, check whether the check valve can open and work normally.

4. When installing the range hood, the levelness of the range hood must be maintained. If the range hood is tilted, the oil flow in the range hood will be affected and oil leakage may occur.

5. The power socket with reliable grounding must be used.

6. The range hood should be cleaned regularly to avoid excessive oil sticking on the motor, turbine and inner surface of the range hood, resulting in excessive noise or vibration, oil dripping and oil leakage.

General knowledge of range hood maintenance

7. When using the range hood, the air in the kitchen should be kept in circulation, which can prevent the negative pressure of the air in the kitchen and ensure the suction capacity of the range hood;

8. Consumers had better not open the range hood for cleaning without authorization, because once the motor is not installed, the smoking effect can not be guaranteed, and the noise will be increased; it is better to let the professional staff of the manufacturer clean it.

Qrcode

Prev: Development trend of kitchen appliances

Next: Purchasing skills of kitchen appliances

Prev: Development trend of kitchen appliances

Next: Purchasing skills of kitchen appliances